Showing all 17 results

Active Filters:

Active filters

Clear Filters
  • MOSSBERGULTIMAGHIGHFLYER12G
    In Stock

    Kicks – Ultimag – High Flyer

    Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
    Conical/parallel internal configuration
    Easy to install and remove with your fingers. No special wrench or tool required.

    • OVERALL LENGTH:”” 3 5/16″
    • PORTED SECTION LENGTH:”” 1 11/16″
    • IN-BARREL LENGTH:”” 1 5/8″
    • STANDARD BORE SIZE:”” .725″
    • MATERIAL:”” 17 – 4 STAINLESS STEEL

    We have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $79.99
  • BERETTAOPTIMAPLUSHIGHFLYER12G_5000x
    In Stock

    Kicks – Optima Plus – High Flyer

    Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
    Conical/parallel internal configuration
    Easy to install and remove with your fingers. No special wrench or tool required.

    • OVERALL LENGTH:”” 3 5/16″
    • PORTED SECTION LENGTH:”” 1 11/16″
    • IN-BARREL LENGTH:”” 1 5/8″
    • STANDARD BORE SIZE:”” .725″
    • MATERIAL:”” 17 – 4 STAINLESS STEEL

    We have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $79.99
  • INVECTOR-PLUS-GT--12G
    In Stock

    Kicks – Invector Plus – Gobblin’ Thunder

    Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits barrels with Invector Plus threads.
    To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.

    • OVERALL LENGTH: 3 5/16″
    • PORTED SECTION LENGTH: 1 1/2″
    • IN-BARREL LENGTH: 2 7/16″
    • STANDARD BORE SIZE: .743″
    • MATERIAL: 17 – 4 STAINLESS STEEL
    • NON-RETURNABLE: NO RETURNS OR EXCHANGES ON THIS ITEMWe have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $79.99
  • KICKS-GT-INVECTOR
    Out Of Stock

    Kicks – Invector – Gobblin’ Thunder

    Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required

    • OVERALL LENGTH: 4 1/16″
    • PORTED SECTION LENGTH: 1 5/16″
    • IN-BARREL LENGTH: 2 25/32″
    • STANDARD BORE SIZE: .625″
    • MATERIAL: 17 – 4 STAINLESS STEELWe have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $79.99
  • KICKS-GT-MOBILECHOKE
    Out Of Stock

    Kicks – Mobilchoke – Gobblin’ Thunder

    Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.

    Fits barrels with Mobil choke style threads.
    Easy to install and remove with your fingers. No special wrench or tool required

    • OVERALL LENGTH: 4 1/16″
    • PORTED SECTION LENGTH: 1 5/16″
    • IN-BARREL LENGTH: 2 25/32″
    • STANDARD BORE SIZE: .625″
    • MATERIAL: 17 – 4 STAINLESS STEEL
      We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $79.99
  • KICKS-BERETTA-OPTIMA-HP-GOBBLIN_THUNDER-675
    Out Of Stock

    Kicks – Optima HP – Gobblin’ Thunder

    Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required

    • OVERALL LENGTH: 4 1/16″
    • PORTED SECTION LENGTH: 1 5/16″
    • IN-BARREL LENGTH: 2 25/32″
    • STANDARD BORE SIZE: .733″
    • MATERIAL: 17 – 4 STAINLESS STEEL
    • We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $79.99
  • KICKS-BERETTA-OPTIMA-PLUS-GOBBLIN_THUNDER-675
    In Stock

    Kicks – Optima Plus – Gobblin’ Thunder

    Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required

    • OVERALL LENGTH: 4 1/16″
    • PORTED SECTION LENGTH: 1 5/16″
    • IN-BARREL LENGTH: 2 25/32″
    • STANDARD BORE SIZE: .625″
    • MATERIAL: 17 – 4 STAINLESS STEEL
      We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $79.99
  • KICKS-REMINGTON-PROBORE-GOBBLIN_THUNDER-660
    In Stock

    Kicks – ProBore – Gobblin’ Thunder

    Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits barrels with pro bore style threads. All pro bore barrels are threaded at the end of the barrel.
    Remington has multiple thread systems that are not interchangeable.

    Probore chokes fit:
    Remington Versamax
    Remington 105cti
    Remington 1100 g3
    Remington premier (sts, field, upland)

    If your shotgun barrel has recessed chokes (ie 870, 887, 1100 & 11-87 models), you will need Remington style chokes.
    This thread style does not fit the Remington SPR shotguns. You will need Truchokes for those shotgun models.
    To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.

    • OVERALL LENGTH: 3 9/16″
    • PORTED SECTION LENGTH: 1 1/2″
    • IN-BARREL LENGTH: 2 1/16″
    • STANDARD BORE SIZE: .735″
    • MATERIAL: 17 – 4 STAINLESS STEEL
      We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $79.99
  • KICKS-REMINGTON-GOBBLIN_THUNDER-660
    Out Of Stock

    Kicks – Remington – Gobblin’ Thunder

    Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits 12g barrels with Remington style threads.
    To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.

    • OVERALL LENGTH: 3 9/16″
    • PORTED SECTION LENGTH: 1 1/2″
    • IN-BARREL LENGTH: 2 1/16″
    • STANDARD BORE SIZE: .730″
    • MATERIAL: 17 – 4 STAINLESS STEEL
      We have done our best to list all the Remington Firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $79.99
  • KICKS-Reminton-ProBore-High_Flyer-12G
    In Stock

    Kicks – Probore – High Flyer

    Kick’s High Flyer extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits barrels with pro bore style threads. All pro bore barrels are threaded at the end of the barrel.
    Remington has multiple thread systems that are not interchangeable.

    Probore chokes fit:
    Remington Versamax
    Remington 105cti
    Remington 1100 g3
    Remington premier (sts, field, upland)

    If your shotgun barrel has recessed chokes (ie 870, 887, 1100 & 11-87 models), you will need Remington style chokes.
    This thread style does not fit the Remington SPR shotguns. You will need Truchokes for those shotgun models.
    To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.

    • OVERALL LENGTH:””3 9/16″
    • PORTED SECTION LENGTH:””1 1/2″
    • IN-BARREL LENGTH:””2 1/16″
    • STANDARD BORE SIZE:””.735″
    • MATERIAL:””17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $79.99
  • INVECTOR-PLUS-HIGHFLYER
    In Stock

    Kicks – Invector Plus – High Flyer

    Extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits barrels with Invector plus threads.
    To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.

    • OVERALL LENGTH:””3 15/16″
    • PORTED SECTION LENGTH:””1 1/2″
    • IN-BARREL LENGTH:””2 7/16″
    • STANDARD BORE SIZE:””.743″
    • MATERIAL:””17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $79.99
  • Beretta-Optima_HP-High_Flyer
    In Stock

    Kicks – Optima HP – High Flyer

    Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction Conical/parallel internal configuration
    Easy to install and remove with your fingers. No special wrench or tool required.

    • OVERALL LENGTH:”” 3 5/16″
    • PORTED SECTION LENGTH:”” 1 11/16″
    • IN-BARREL LENGTH:”” 1 5/8″
    • STANDARD BORE SIZE:”” .733″
    • MATERIAL:”” 17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $79.99
  • BROWNING-INVECTOR-DS-HIGHFLYER-12G
    In Stock

    Kicks – Invector DS – High Flyer

    Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
    Conical/parallel internal configuration
    Easy to install and remove with your fingers. No special wrench or tool required.

    • OVERALL LENGTH:”” 3 5/16″
    • PORTED SECTION LENGTH:”” 1 11/16″
    • IN-BARREL LENGTH:”” 1 5/8″
    • STANDARD BORE SIZE:”” .725″
    • MATERIAL:”” 17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $79.99
  • BENELLICRIOPLUSHIGHFLYER
    In Stock

    Kicks – Crio Plus – High Flyer

    Extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits barrels with crio plus style threads.

    • OVERALL LENGTH:””4 9/32″
    • PORTED SECTION LENGTH:””1 1/2″
    • IN-BARREL LENGTH:””2 13/16″
    • STANDARD BORE SIZE:””.723″
    • MATERIAL:””17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $79.99
  • BENELLIMOBILCHOKEHIGHFLYER
    In Stock

    Kicks – Mobilchoke – High Flyer

    Kicks High Flyer Choke Tubes are an extended choke with a diagonally-ported design for recoil reduction
    Conical/parallel internal configuration
    Easy to install and remove with your fingers. No special wrench or tool required.

      • OVERALL LENGTH: 3 5/16″
      • PORTED SECTION LENGTH: 1 11/16″
      • IN-BARREL LENGTH: 1 5/8″
      • STANDARD BORE SIZE: .723
      • MATERIAL: 17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm

    $79.99
  • INVECTOR
    In Stock

    Kicks – Invector – High Flyer

    Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction Conical/parallel internal configuration
    Easy to install and remove with your fingers. No special wrench or tool required.

    OVERALL LENGTH:”” 3 5/16″
    PORTED SECTION LENGTH:”” 1 11/16″
    IN-BARREL LENGTH:”” 1 5/8″
    STANDARD BORE SIZE:”” .725″
    MATERIAL:”” 17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm

    $79.99
  • REMINGTON-HIGHFLYER
    In Stock

    Kicks – Remington – High Flyer

    Kick’s High Flyer extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits 12g barrels with Remington style threads.
    To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.

    • OVERALL LENGTH:””3 9/16″
    • PORTED SECTION LENGTH:””1 1/2″
    • IN-BARREL LENGTH:””2 1/16″
    • STANDARD BORE SIZE:””.730″
    • MATERIAL:””17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm

    $79.99