Alumilite Clear Slow Casting Resin (16lb)


Alumilite Clear Slow is a crystal-clear resin with a longer (twelve-minute) open time, making it convenient to use for large casting and turning projects.

  • High impact
  • Convenient 1:1 mix ratio (by weight)
  • Thin viscosity for easy mixing
  • Easily dyed or pigmented
  • Can be turned, drilled, sanded, and polished to high gloss
  • Off-mixing may produce hazy or frosted parts
  • Minimal bubbles can be achieved by slowly mixing and pouring
  • Pressure casting is recommended for bubble-free results

Note: The clarity of resin will shift from batch to batch based on the clarity of incoming raw materials. In most cases, this will not affect product unless used over white backgrounds.

Prior to using product, please read all Technical Data, Safety Data, and Instruction sheets linked below.  Always visit the manufactures website for the latest safety and technical data info.

Technical Data Sheet
Safety Data Sheet

3 in stock

SKU: 032001-AL-ACS-16LB Categories: , ,


Product: Alumilite Clear Slow
Color: Clear
Mix Ratio: 1:1 by weight
Pot Life: 12 minutes
Demold Time (100 gram mass): 2-4 hours
Mixed Viscosity (cps): 400
Specific Gravity: 1.04
Shore Hardness (ASTM D2240): 80 D
Shrinkage (in./in.): .005
Tensile Strength (ASTM D638, psi): 3,120
Elongation (in./in.): 30-40%
Temperature Resistance: 140º F


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.