Showing 1–24 of 34 results
-
Kicks – Invector DS – Gobblin’ Thunder
$82.99Kicks”” Gobblin’ Thunder Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – UltiMag – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits 12g barrels with Remington style threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 9/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 1/16″
- STANDARD BORE SIZE: .730″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the Remington Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Ken Capling – XXXL Moose Quarter Game Bag
Original price was: $9.99.$8.88Current price is: $8.88.Our high-quality game bags are tough and have the stretch you need for after the hunt success. Each individual package contains one bag for one large moose quarter. These tightly woven cotton/polyester game bags feature a double stitched bottom. Vacuum sealed, each bag is 16” wide by 60” long and weighs 1 pound 10oz’s for easy packing.
-
Epic Baits – Finesse Jig
Original price was: $7.99.$6.59Current price is: $6.59.We use Gamakatsu hooks in our Finesse Jigs, 3-D eyes, and the Hole-in-One skirt band, the skirt bands are directly glued to the core them wrapped with another band which helps make the skirt are in the water for better action, unlike other Jigs that use one single band on their skirts. All these unique items make Epic Baits Finesse Jigs the most sought after Jig on the market.
-
Piscifun – Spark Pro 80 – Baitcast Reel
Original price was: $59.99.$45.99Current price is: $45.99.Smooth Operation– Optimal shielded bearings means smooth operation and increased resistance from wear and tear in both fresh and saltwater. We put the right bearings in the right place to ensure impeccable performance. They redefine smoothness for a low profile bait casting
Exceptional Stability and Durability –The Double-Shaft Supported Line Wind delivers an incredible 40% increase instability, as well as an astounding 35% increase in overall durability. This innovation greatly improves the overall operation of the reel.
Powerful Brake and Smooth Drag– The Spark bait caster fishing reel comes with a magnetic braking system featuring 8 magnetic discs, which offers quick on-the-fly adjustment and greatly reduces the chance of The oversize Disc Carbon Fiber Drag provides consistent and smooth stopping power while battling big fish.
Super Compact –The compact, ergonomically designed frame is ultra- The handle knobs are located closer to the rod’s centerline, reducing wobble of the rod and reel in your hand as you crank, this results in less wasted energy and a more powerful retrieve.
Lighter and Stronger– The double hardened anodized 7075 Aircraft grade aluminum main gear reduces the weight of the reel by 10% without sacrificing strength and durability.
-
Kicks – Ultimag – High Flyer
$82.99Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Optima Plus – High Flyer
$82.99Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
74th Element Tungsten-Flipper Flipping Jig
Original price was: $6.29.$5.48Current price is: $5.48.Designed for the ”Flipping” technique
Anti-weed protector
Silicone skirt
High quality hook with large body -
Kicks – Invector Plus – Gobblin’ Thunder
$82.99Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with Invector Plus threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 5/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 7/16″
- STANDARD BORE SIZE: .743″
- MATERIAL: 17 – 4 STAINLESS STEEL
- NON-RETURNABLE: NO RETURNS OR EXCHANGES ON THIS ITEMWe have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Invector – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .625″
- MATERIAL: 17 – 4 STAINLESS STEELWe have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Mobilchoke – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Fits barrels with Mobil choke style threads.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .625″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Optima HP – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .733″
- MATERIAL: 17 – 4 STAINLESS STEEL
- We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Optima Plus – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .625″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – ProBore – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with pro bore style threads. All pro bore barrels are threaded at the end of the barrel.
Remington has multiple thread systems that are not interchangeable.Probore chokes fit:
Remington Versamax
Remington 105cti
Remington 1100 g3
Remington premier (sts, field, upland)If your shotgun barrel has recessed chokes (ie 870, 887, 1100 & 11-87 models), you will need Remington style chokes.
This thread style does not fit the Remington SPR shotguns. You will need Truchokes for those shotgun models.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 9/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 1/16″
- STANDARD BORE SIZE: .735″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Remington – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits 12g barrels with Remington style threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 9/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 1/16″
- STANDARD BORE SIZE: .730″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the Remington Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Probore – High Flyer
$82.99Kick’s High Flyer extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with pro bore style threads. All pro bore barrels are threaded at the end of the barrel.
Remington has multiple thread systems that are not interchangeable.Probore chokes fit:
Remington Versamax
Remington 105cti
Remington 1100 g3
Remington premier (sts, field, upland)If your shotgun barrel has recessed chokes (ie 870, 887, 1100 & 11-87 models), you will need Remington style chokes.
This thread style does not fit the Remington SPR shotguns. You will need Truchokes for those shotgun models.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH:””3 9/16″
- PORTED SECTION LENGTH:””1 1/2″
- IN-BARREL LENGTH:””2 1/16″
- STANDARD BORE SIZE:””.735″
- MATERIAL:””17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Looter Lure – Looter Jig – 1-5/8 – 1/8oz
$8.99Looter Jigs have the same premium silver stamped brass as the Original Looter Lures, so they will hold their shine in the water! Fish are crazy for Looter Jigs, so they are a must have for your tackle box!
-
Looter Lure – Looter Jig – 1.5in – 1/8oz
$8.99Looter Jigs have the same premium silver stamped brass as the Original Looter Lures, so they will hold their shine in the water! Fish are crazy for Looter Jigs, so they are a must have for your tackle box!
-
Diawa – Tatula 100 – Baitcast Reels
Original price was: $219.99.$191.88Current price is: $191.88.The TATULA 100 is the smallest and lightest reel in the series. It is the most comfortable and palm-able reel seen in many years. And with a feather weight of 6.9 ounces it may be the lightest, most fatigue free, reel Daiwa has ever built. The Zero Adjuster spool setting and T-Wing System level wind, casts longer and more accurately.
The comfort is enhanced by redesigned Soft Touch Handle Knobs. The reel is also well suited for junior anglers with smaller hands. The bones of the reel are strong with an Aluminum Frame providing rigidity and a smooth performance. The TATULA 100 is the smallest and lightest reel in the series. It is the most comfortable and palm-able reel seen in many years. And with a feather weight of 6.9 ounces it may be the lightest, most fatigue free, reel Daiwa has ever built.
-
Zman – 1/2oz – CrossEyeZ – Flippin Jig
Original price was: $6.49.$5.68Current price is: $5.68.Designed by B.A.S.S. Elite Series pro and noted jig-fishing specialist David Walker, CrossEyeZ Flipping Jigs are built around heavy duty, 4/0 VMC® flipping hooks hand-picked by Walker, as well as wire trailer keepers and copper wire-tied 100% silicone skirts not found on other widely available jigs. Their unique head design performs flawlessly around all types of shallow-water cover, and their durable, color-matched head paint schemes and hallmark ‘cross eyes’ elicit close-combat strikes when other ‘ordinary’ jigs simply won’t.
-
Zman – ShroomZ – Micro Finesse Jig
$6.49A skirted, Midwest finesse-style mushroom jighead that’s known to entice strikes in tough conditions, the ShroomZ Micro Finesse Jig’s 100% silicone skirts in custom-designed patterns provide a realistic appearance, lifelike action, and tantalizing slow fall rate that is simply deadly on finicky bass.
-
Savage Gear – Baitcaster-8.1-SG8-100-BC
$319.00With power, style, performance and a wide range of unique features, the SG8 series of bait casting reels has it all. The 100-size versions are designed perfectly for casting light lures such as soft baits and crankbaits, but they can also handle medium to heavy baits such as larger soft lures and jerk baits, giving anglers great versatility. The SG8 reels are built strong and rigid thanks to their one-piece aluminum frames, making them ideal for taming all kinds of predators including bass, pike, walleye and even perch and trout. Features such as our proprietary Dura Grease, Line-ID, external centrifugal brake and finely-tuned gear ratios guarantee a reel that runs smoothly time and time again.
-
Lunkerhunt – 3/8oz – Skirted Swim Jig
$7.99NATURAL SERIES
Lunkerhunt Natural Skirted Swim Jigs™ are designed to mimic the baitfish that is found in most freshwater lakes. They weigh 3/8 oz and have a premium 4/0 – 60 degree hook, wire tied silicone skirts, and a perfectly sized nylon bristle weed guard that makes them weedless but does not impede hook sets.
- Weight: 3/8oz
- High quality finish and detail
- Wire tied skirts
- Silicone Skirts
- Premium 4/0 black nickel, 60 degree hook
-
Kicks – Invector Plus – High Flyer
$82.99Extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with Invector plus threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.
- OVERALL LENGTH:””3 15/16″
- PORTED SECTION LENGTH:””1 1/2″
- IN-BARREL LENGTH:””2 7/16″
- STANDARD BORE SIZE:””.743″
- MATERIAL:””17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
