Showing 1–24 of 32 results
-
Kicks – Invector DS – Gobblin’ Thunder
$82.99Kicks”” Gobblin’ Thunder Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – UltiMag – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits 12g barrels with Remington style threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 9/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 1/16″
- STANDARD BORE SIZE: .730″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the Remington Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
MTP – MB650-Cast
Original price was: $51.99.$46.99Current price is: $46.99.With malleable cast jaws Our MB-650-C has the same adjustable pan system, frame, heavy-duty springs, chain & swivels as our original MB-650’s. The similarities stop at the jaws however as the MB-650-C sports super-heavy 3/8″ thick, 1/4″ offset positive locking malleable cast jaws. A real coyote catching machine! The MB-650 has a unique spring and lever system which is all one piece and both jaws are held down by a special trigger system that will keep any animal from flipping up a loose jaw. All MB-650’s have an offset jaw and are 4-coiled.
-
Duke Traps-0650-Coil Spring Trap-Pro Series 650OS
Original price was: $39.99.$33.99Current price is: $33.99.Coil Spring Traps are foot-hold restraining devices used to catch and hold wild animals. This style of trap has been in use since the early part of the 20th century and is widely accepted as a cost effective and efficient tool for managing wildlife populations. Coil Spring Traps are manufactured of steel components and powered by a set of compact coil springs. Models range from the small #1 CS with a 4″ jaw spread for Mink to the larger #4 CS 4X with a 6.5″ jaw spread for Coyote. Duke also offers three models of humane rubber padded jaw traps for Fox and Coyote.
-
Duke Traps-0550-Coil Spring Trap-Pro Series 550OS
Original price was: $35.99.$28.88Current price is: $28.88.NOTICE
You must be a licensed trapper to use this trap in CanadaCoil Spring Traps are foot-hold restraining devices used to catch and hold wild animals. This style of trap has been in use since the early part of the 20th century and is widely accepted as a cost effective and efficient tool for managing wildlife populations. Coil Spring Traps are manufactured of steel components and powered by a set of compact coil springs. Models range from the small #1 CS with a 4″ jaw spread for Mink to the larger #4 CS 4X with a 6.5″ jaw spread for Coyote. Duke also offers three models of humane rubber padded jaw traps for Fox and Coyote.
-
Wiebe – Zipper Knife
Original price was: $14.99.$12.88Current price is: $12.88.Foot to foot ( money cut ) and down the tail in just seconds. The Wiebe Zipper will save you enormous amounts of time. The blade lasts and lasts yet can be replaced for under 40 cents. Comes with one blade.
-
Bolen-Pelting Knife
Original price was: $27.99.$25.88Current price is: $25.88.Sturdy construction and finest steel blade. This is the most unusual (and needed) knife ever introduced to the trappers market. It makes a great opening knife for mink, rat, or almost any fur.
-
Wiebe-Wicked Sharp Replacement Blades
Original price was: $11.99.$9.88Current price is: $9.88.Fits not only the Wiebe Wicked Sharp Knives but the Havalon knives as well. Razor sharp and just snap in place.
12 Blades per pack
*knife handle not included with replacement blades
-
Wiebe-Fixed Blade-Boss Dog Knife
Original price was: $37.99.$35.88Current price is: $35.88.Peel those critters with a surgeon’s knife. No skinner on the planet is sharper. When the blade goes dull, snap on a new one. Soft, comfortable handle, makes fur handling a breeze.
– 24 – 2 7/8″ Wiebe Replacement blades included (pack of 24)
-Overall length 8″ -
Wiebe-5103-Trappers Knife Kit 3 Piece
Original price was: $61.88.$55.88Current price is: $55.88.The set includes a comfort grip skinning knife with a 4″ blade, beaver knife with a 2.37″ blade and a 6.37″ tall zipper.
-
Duke Traps – 0501-Coil Spring Trap-#3 CS Offset Jaw
Original price was: $26.99.$23.88Current price is: $23.88.NOTICE
You must be a licensed trapper to use this trap in CanadaCoil Spring Traps are foot-hold restraining devices used to catch and hold wild animals. This style of trap has been in use since the early part of the 20th century and is widely accepted as a cost effective and efficient tool for managing wildlife populations. Coil Spring Traps are manufactured of steel components and powered by a set of compact coil springs. Models range from the small #1 CS with a 4″ jaw spread for Mink to the larger #4 CS 4X with a 6.5″ jaw spread for Coyote. Duke also offers three models of humane rubber padded jaw traps for Fox and Coyote.
# 3 CS OS Offset Jaw
Model: 0501
Jaw Spread: 6”
Target: Bobcat, Coyote, Lynx -
Duke Traps – 0474-Coil Spring Trap-#3 CS Pad Rubber Jaw
Original price was: $33.99.$26.88Current price is: $26.88.NOTICE
You must be a licensed trapper to use this trap in CanadaCoil Spring Traps are foot-hold restraining devices used to catch and hold wild animals. This style of trap has been in use since the early part of the 20th century and is widely accepted as a cost effective and efficient tool for managing wildlife populations. Coil Spring Traps are manufactured of steel components and powered by a set of compact coil springs. Models range from the small #1 CS with a 4″ jaw spread for Mink to the larger #4 CS 4X with a 6.5″ jaw spread for Coyote. Duke also offers three models of humane rubber padded jaw traps for Fox and Coyote.
# 3 CS PAD Rubber Jaw
Model: 0474
Jaw Spread: 6”
Target: Bobcat, Coyote, Lynx -
Duke Traps – 0470-Coil Spring Trap-#1 1/2 CS
Original price was: $16.99.$13.88Current price is: $13.88.NOTICE
You must be a licensed trapper to use this trap in CanadaCoil Spring Traps are foot-hold restraining devices used to catch and hold wild animals. This style of trap has been in use since the early part of the 20th century and is widely accepted as a cost effective and efficient tool for managing wildlife populations. Coil Spring Traps are manufactured of steel components and powered by a set of compact coil springs. Models range from the small #1 CS with a 4″ jaw spread for Mink to the larger #4 CS 4X with a 6.5″ jaw spread for Coyote. Duke also offers three models of humane rubber padded jaw traps for Fox and Coyote.
# 1 1/2 CS
Model: 0470
Jaw Spread: 4.75”
Target: Fox, Nutria, Raccoon -
Duke Traps – 0510-Coil Spring Trap-DP Coon Trap
$30.99NOTICE
You must be a licensed trapper to use this trap in CanadaCoil Spring Traps are foot-hold restraining devices used to catch and hold wild animals. This style of trap has been in use since the early part of the 20th century and is widely accepted as a cost effective and efficient tool for managing wildlife populations. Coil Spring Traps are manufactured of steel components and powered by a set of compact coil springs. Models range from the small #1 CS with a 4″ jaw spread for Mink to the larger #4 CS 4X with a 6.5″ jaw spread for Coyote. Duke also offers three models of humane rubber padded jaw traps for Fox and Coyote.
DP Coon Trap
Model: 0510
Opening: 1.25”
Target: Raccoon -
Kicks – Ultimag – High Flyer
$82.99Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Optima Plus – High Flyer
$82.99Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Invector Plus – Gobblin’ Thunder
$82.99Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with Invector Plus threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 5/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 7/16″
- STANDARD BORE SIZE: .743″
- MATERIAL: 17 – 4 STAINLESS STEEL
- NON-RETURNABLE: NO RETURNS OR EXCHANGES ON THIS ITEMWe have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Invector – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .625″
- MATERIAL: 17 – 4 STAINLESS STEELWe have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Mobilchoke – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Fits barrels with Mobil choke style threads.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .625″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Optima HP – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .733″
- MATERIAL: 17 – 4 STAINLESS STEEL
- We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Optima Plus – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .625″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – ProBore – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with pro bore style threads. All pro bore barrels are threaded at the end of the barrel.
Remington has multiple thread systems that are not interchangeable.Probore chokes fit:
Remington Versamax
Remington 105cti
Remington 1100 g3
Remington premier (sts, field, upland)If your shotgun barrel has recessed chokes (ie 870, 887, 1100 & 11-87 models), you will need Remington style chokes.
This thread style does not fit the Remington SPR shotguns. You will need Truchokes for those shotgun models.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 9/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 1/16″
- STANDARD BORE SIZE: .735″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Remington – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits 12g barrels with Remington style threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 9/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 1/16″
- STANDARD BORE SIZE: .730″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the Remington Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Probore – High Flyer
$82.99Kick’s High Flyer extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with pro bore style threads. All pro bore barrels are threaded at the end of the barrel.
Remington has multiple thread systems that are not interchangeable.Probore chokes fit:
Remington Versamax
Remington 105cti
Remington 1100 g3
Remington premier (sts, field, upland)If your shotgun barrel has recessed chokes (ie 870, 887, 1100 & 11-87 models), you will need Remington style chokes.
This thread style does not fit the Remington SPR shotguns. You will need Truchokes for those shotgun models.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH:””3 9/16″
- PORTED SECTION LENGTH:””1 1/2″
- IN-BARREL LENGTH:””2 1/16″
- STANDARD BORE SIZE:””.735″
- MATERIAL:””17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
