Showing 1–24 of 29 results
-
Kicks – Invector DS – Gobblin’ Thunder
$82.99Kicks”” Gobblin’ Thunder Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – UltiMag – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits 12g barrels with Remington style threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH:Â 3 9/16″
- PORTED SECTION LENGTH:Â 1 1/2″
- IN-BARREL LENGTH:Â 2 1/16″
- STANDARD BORE SIZE:Â .730″
- MATERIAL:Â 17 – 4 STAINLESS STEEL
We have done our best to list all the Remington Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Ultimag – High Flyer
$82.99Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Optima Plus – High Flyer
$82.99Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Invector Plus – Gobblin’ Thunder
$82.99Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with Invector Plus threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH:Â 3 5/16″
- PORTED SECTION LENGTH:Â 1 1/2″
- IN-BARREL LENGTH:Â 2 7/16″
- STANDARD BORE SIZE:Â .743″
- MATERIAL:Â 17 – 4 STAINLESS STEEL
- NON-RETURNABLE: NO RETURNS OR EXCHANGES ON THIS ITEMWe have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Invector – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH:Â 4 1/16″
- PORTED SECTION LENGTH:Â 1 5/16″
- IN-BARREL LENGTH:Â 2 25/32″
- STANDARD BORE SIZE:Â .625″
- MATERIAL: 17 – 4 STAINLESS STEELWe have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Mobilchoke – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Fits barrels with Mobil choke style threads.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH:Â 4 1/16″
- PORTED SECTION LENGTH:Â 1 5/16″
- IN-BARREL LENGTH:Â 2 25/32″
- STANDARD BORE SIZE:Â .625″
- MATERIAL:Â 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Optima HP – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH:Â 4 1/16″
- PORTED SECTION LENGTH:Â 1 5/16″
- IN-BARREL LENGTH:Â 2 25/32″
- STANDARD BORE SIZE:Â .733″
- MATERIAL:Â 17 – 4 STAINLESS STEEL
- We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Optima Plus – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH:Â 4 1/16″
- PORTED SECTION LENGTH:Â 1 5/16″
- IN-BARREL LENGTH:Â 2 25/32″
- STANDARD BORE SIZE:Â .625″
- MATERIAL:Â 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – ProBore – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with pro bore style threads. All pro bore barrels are threaded at the end of the barrel.
Remington has multiple thread systems that are not interchangeable.Probore chokes fit:
Remington Versamax
Remington 105cti
Remington 1100 g3
Remington premier (sts, field, upland)If your shotgun barrel has recessed chokes (ie 870, 887, 1100 & 11-87 models), you will need Remington style chokes.
This thread style does not fit the Remington SPR shotguns. You will need Truchokes for those shotgun models.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH:Â 3 9/16″
- PORTED SECTION LENGTH:Â 1 1/2″
- IN-BARREL LENGTH:Â 2 1/16″
- STANDARD BORE SIZE:Â .735″
- MATERIAL:Â 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Remington – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits 12g barrels with Remington style threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH:Â 3 9/16″
- PORTED SECTION LENGTH:Â 1 1/2″
- IN-BARREL LENGTH:Â 2 1/16″
- STANDARD BORE SIZE:Â .730″
- MATERIAL:Â 17 – 4 STAINLESS STEEL
We have done our best to list all the Remington Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Probore – High Flyer
$82.99Kick’s High Flyer extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with pro bore style threads. All pro bore barrels are threaded at the end of the barrel.
Remington has multiple thread systems that are not interchangeable.Probore chokes fit:
Remington Versamax
Remington 105cti
Remington 1100 g3
Remington premier (sts, field, upland)If your shotgun barrel has recessed chokes (ie 870, 887, 1100 & 11-87 models), you will need Remington style chokes.
This thread style does not fit the Remington SPR shotguns. You will need Truchokes for those shotgun models.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH:””3 9/16″
- PORTED SECTION LENGTH:””1 1/2″
- IN-BARREL LENGTH:””2 1/16″
- STANDARD BORE SIZE:””.735″
- MATERIAL:””17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
6th Sense – Keel Weighted Hooks
$6.99The 6th Sense Keel Weighted Hooks are perfect for our Divine Swimbaits as well as other soft plastics swimbaits and jerkbaits. This widegap hook design provides the perfect amount of gap to allow larger bodied plastics to compress down and ensure a solid hook-set every time. Each Keel Hook is equipped with a screw-lock bait keeper that not only makes this hook weedless but also gives the bait more action and delivers a presentation fish cannot resist. The Keel-shape weight design sinks your bait quickly while maintaining stabilization to prevent rolling keep your bait running true, cast after cast.
-
Rabid Baits – Craw
$8.59A revolutionary and realistic crayfish imitation, the Rabid Craw is scientifically designed to capture more bites. Add the patented impregnated hair and scent, and you’ve got an irresistible temptation fish can’t resist. The perfectly formed thorax is designed to fit with your Rabid Tungsten Ned rigs but also perfect as a trailer and even as a saltwater fiddler crab imitation, thanks to its buoyant claws that not only stand up but keep moving when the Rabid Craw is standing in a natural defensive posture. When paired with the Rabid Bullet Tungsten, or JigHeads, the Rabid Craw is an excellent downsized option for pitching into cover when the bite gets tough and Bass shun larger offerings. Available in a wide array of fish catching color combinations that will match the diversity of rivers, streams, ponds, and lakes where craws are present.Craw: Features-Compact and lifelike 3″ crawfish imitation has proprietary fur embedded claws which attracts more fish and is ideal for Ned rig applications.-Natural and Biodegradable finesse action hair color combination that quivers and moves at the slightest twitch-Buoyant claws float at rest mimicking the natural defensive posture of a crawfish-Scent impregnated so fish hold on longer-Engineered body & underbelly to give a 360 lifelike view at any angle-Perfectly shaped thorax to fit Rabid Ned rig-Ideal trailer for small skirted jigs -
Dream Fishing – 3.75″ – Dreamycraw
$7.99The Dreamycraw has a unique swimming action in the water, it is perfect for those times when you want to create more movement to attract fish. A crayfish in defense mode has the clamps raised, adding a weight to the front of the latter, it will have the body raised which makes it an ideal bait.
MADE IN CANADA WITH OUR UNIQUE FORMULA, THESE MOLDED PLASTIC LURES ARE ECO-RESPONSIBLE AND DESIGNED FOR A LARGE NUMBER OF SPECIES. IN ADDITION TO THE ULTRA-REALISTIC MOVEMENTS, WE ADD ATTRACTIVE SMELLS FOR THE FISH DIRECTLY IN THE MOLDING PROCESS.
-
Zman – 3.5″ – Pro Crawz
$5.99By overwhelming customer demand, the 3.5-inch Pro CrawZ equips anglers with an upsized version of the popular TRD CrawZ. Bulked up ElaZtech® claws are super-buoyant to float up at rest, displaying a crayfish’s natural defensive posture. Anatomical realism continues with tucked under tail, bulbous crayfish eyes and natural swimmerets for secondary elements of underwater animation. Ideal as a jig trailer for flipping or punching, as well as Texas rigging. Also pairs perfectly with Z-Man’s Pro BulletZ Weedless Jigheads.
-
Zman – 2.5″ – TRD Crawz
$5.99An ultra-realistic crayfish imitation, the TRD CrawZ was designed for Ned-rigging but is also ideal for use as a finesse jig trailer and even as a saltwater fiddler crab imitation thanks to its buoyant claws that stand the bait up in a natural defensive posture when dragged along the bottom. Paired with the Finesse BulletZ Jigheads, the TRD CrawZ is an excellent downsized option for pitching into cover when the bite gets tough and bass shun larger offerings. Available in a wide array of color options, there’s a TRD CrawZ to ‘match the hatch’ in virtually all rivers, streams, ponds, and lakes where craws are present!
-
Great Lakes Finesse – 2.1″ – Snack Craw
$7.99There are a ton of craw baits on the market, and most of them will catch fish. We designed this bait to be stealthy and non-threatening with a small profile to catch pressured, conditioned fish.
Three of the available six patterns feature floating claws that lift in a natural and slightly defensive posture – perfect for a ball head or NED head – while the other three patterns are made with our neutral buoyancy plastic that better suits dropshot or Carolina Rig presentations.
The industry trend with craw-style baits has been to add more features and more appendages, but our research and testing repeatedly showed that less is more when it comes to craws. This bait has no legs, and simple claws – when pulled forward on a jighead the claws push together and the bait slides away just like a real crayfish. The underside of the arms have relief cuts to allow the arms to hinge slightly for subtle action.
-
VENOM LURES – 3in – Terror Craw
$7.99As versatile as it is deadly, the Venom Lures Terror Craw offers a mouth-watering morsel that can be used with a wide-range of tournament tactics. Perfect for a jig trailer, Texas-rig, and even a shaky head, the Venom Lures Terror Craw is molded with a heavily ribbed body and enlarged claws for maximum water displacement and an enticing flapping action that craw hungry bass can’t ignore.
-
Kicks – Invector Plus – High Flyer
$82.99Extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with Invector plus threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.
- OVERALL LENGTH:””3 15/16″
- PORTED SECTION LENGTH:””1 1/2″
- IN-BARREL LENGTH:””2 7/16″
- STANDARD BORE SIZE:””.743″
- MATERIAL:””17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Optima HP – High Flyer
$82.99Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .733″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Invector DS – High Flyer
$82.99Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Crio Plus – High Flyer
$82.99Extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with crio plus style threads.- OVERALL LENGTH:””4 9/32″
- PORTED SECTION LENGTH:””1 1/2″
- IN-BARREL LENGTH:””2 13/16″
- STANDARD BORE SIZE:””.723″
- MATERIAL:””17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Mobilchoke – High Flyer
$82.99Kicks High Flyer Choke Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.-
- OVERALL LENGTH: 3 5/16″
- PORTED SECTION LENGTH: 1 11/16″
- IN-BARREL LENGTH: 1 5/8″
- STANDARD BORE SIZE: .723
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
