Showing all 22 results

Active Filters:

Active filters

Clear Filters
  • BROWNING-INVECTOR-DS-HIGHFLYER-12G
    In Stock

    Kicks – Invector DS – Gobblin’ Thunder

    Kicks”” Gobblin’ Thunder Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
    Conical/parallel internal configuration
    Easy to install and remove with your fingers. No special wrench or tool required.

    • OVERALL LENGTH:”” 3 5/16″
    • PORTED SECTION LENGTH:”” 1 11/16″
    • IN-BARREL LENGTH:”” 1 5/8″
    • STANDARD BORE SIZE:”” .725″
    • MATERIAL:”” 17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $82.99
    Select options
  • MOSSBERGULTIMAGGOBBLIN_THUNDER12G
    In Stock

    Kicks – UltiMag – Gobblin’ Thunder

    Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits 12g barrels with Remington style threads.
    To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.

    • OVERALL LENGTH: 3 9/16″
    • PORTED SECTION LENGTH: 1 1/2″
    • IN-BARREL LENGTH: 2 1/16″
    • STANDARD BORE SIZE: .730″
    • MATERIAL: 17 – 4 STAINLESS STEEL
      We have done our best to list all the Remington Firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $82.99
    Select options
  • MOSSBERGULTIMAGHIGHFLYER12G
    In Stock

    Kicks – Ultimag – High Flyer

    Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
    Conical/parallel internal configuration
    Easy to install and remove with your fingers. No special wrench or tool required.

    • OVERALL LENGTH:”” 3 5/16″
    • PORTED SECTION LENGTH:”” 1 11/16″
    • IN-BARREL LENGTH:”” 1 5/8″
    • STANDARD BORE SIZE:”” .725″
    • MATERIAL:”” 17 – 4 STAINLESS STEEL

    We have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $82.99
    Select options
  • BERETTAOPTIMAPLUSHIGHFLYER12G_5000x
    In Stock

    Kicks – Optima Plus – High Flyer

    Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
    Conical/parallel internal configuration
    Easy to install and remove with your fingers. No special wrench or tool required.

    • OVERALL LENGTH:”” 3 5/16″
    • PORTED SECTION LENGTH:”” 1 11/16″
    • IN-BARREL LENGTH:”” 1 5/8″
    • STANDARD BORE SIZE:”” .725″
    • MATERIAL:”” 17 – 4 STAINLESS STEEL

    We have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $82.99
    Select options
  • INVECTOR-PLUS-GT--12G
    In Stock

    Kicks – Invector Plus – Gobblin’ Thunder

    Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits barrels with Invector Plus threads.
    To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.

    • OVERALL LENGTH: 3 5/16″
    • PORTED SECTION LENGTH: 1 1/2″
    • IN-BARREL LENGTH: 2 7/16″
    • STANDARD BORE SIZE: .743″
    • MATERIAL: 17 – 4 STAINLESS STEEL
    • NON-RETURNABLE: NO RETURNS OR EXCHANGES ON THIS ITEMWe have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $82.99
    Select options
  • KICKS-GT-INVECTOR
    In Stock

    Kicks – Invector – Gobblin’ Thunder

    Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required

    • OVERALL LENGTH: 4 1/16″
    • PORTED SECTION LENGTH: 1 5/16″
    • IN-BARREL LENGTH: 2 25/32″
    • STANDARD BORE SIZE: .625″
    • MATERIAL: 17 – 4 STAINLESS STEELWe have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $82.99
    Select options
  • KICKS-GT-MOBILECHOKE
    In Stock

    Kicks – Mobilchoke – Gobblin’ Thunder

    Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.

    Fits barrels with Mobil choke style threads.
    Easy to install and remove with your fingers. No special wrench or tool required

    • OVERALL LENGTH: 4 1/16″
    • PORTED SECTION LENGTH: 1 5/16″
    • IN-BARREL LENGTH: 2 25/32″
    • STANDARD BORE SIZE: .625″
    • MATERIAL: 17 – 4 STAINLESS STEEL
      We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $82.99
    Select options
  • KICKS-BERETTA-OPTIMA-HP-GOBBLIN_THUNDER-675
    Out Of Stock

    Kicks – Optima HP – Gobblin’ Thunder

    Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required

    • OVERALL LENGTH: 4 1/16″
    • PORTED SECTION LENGTH: 1 5/16″
    • IN-BARREL LENGTH: 2 25/32″
    • STANDARD BORE SIZE: .733″
    • MATERIAL: 17 – 4 STAINLESS STEEL
    • We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $82.99
    Select options
  • KICKS-BERETTA-OPTIMA-PLUS-GOBBLIN_THUNDER-675
    In Stock

    Kicks – Optima Plus – Gobblin’ Thunder

    Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required

    • OVERALL LENGTH: 4 1/16″
    • PORTED SECTION LENGTH: 1 5/16″
    • IN-BARREL LENGTH: 2 25/32″
    • STANDARD BORE SIZE: .625″
    • MATERIAL: 17 – 4 STAINLESS STEEL
      We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $82.99
    Select options
  • KICKS-REMINGTON-PROBORE-GOBBLIN_THUNDER-660
    In Stock

    Kicks – ProBore – Gobblin’ Thunder

    Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits barrels with pro bore style threads. All pro bore barrels are threaded at the end of the barrel.
    Remington has multiple thread systems that are not interchangeable.

    Probore chokes fit:
    Remington Versamax
    Remington 105cti
    Remington 1100 g3
    Remington premier (sts, field, upland)

    If your shotgun barrel has recessed chokes (ie 870, 887, 1100 & 11-87 models), you will need Remington style chokes.
    This thread style does not fit the Remington SPR shotguns. You will need Truchokes for those shotgun models.
    To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.

    • OVERALL LENGTH: 3 9/16″
    • PORTED SECTION LENGTH: 1 1/2″
    • IN-BARREL LENGTH: 2 1/16″
    • STANDARD BORE SIZE: .735″
    • MATERIAL: 17 – 4 STAINLESS STEEL
      We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $82.99
    Select options
  • KICKS-REMINGTON-GOBBLIN_THUNDER-660
    In Stock

    Kicks – Remington – Gobblin’ Thunder

    Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits 12g barrels with Remington style threads.
    To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.

    • OVERALL LENGTH: 3 9/16″
    • PORTED SECTION LENGTH: 1 1/2″
    • IN-BARREL LENGTH: 2 1/16″
    • STANDARD BORE SIZE: .730″
    • MATERIAL: 17 – 4 STAINLESS STEEL
      We have done our best to list all the Remington Firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $82.99
    Select options
  • KICKS-Reminton-ProBore-High_Flyer-12G
    In Stock

    Kicks – Probore – High Flyer

    Kick’s High Flyer extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits barrels with pro bore style threads. All pro bore barrels are threaded at the end of the barrel.
    Remington has multiple thread systems that are not interchangeable.

    Probore chokes fit:
    Remington Versamax
    Remington 105cti
    Remington 1100 g3
    Remington premier (sts, field, upland)

    If your shotgun barrel has recessed chokes (ie 870, 887, 1100 & 11-87 models), you will need Remington style chokes.
    This thread style does not fit the Remington SPR shotguns. You will need Truchokes for those shotgun models.
    To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.

    • OVERALL LENGTH:””3 9/16″
    • PORTED SECTION LENGTH:””1 1/2″
    • IN-BARREL LENGTH:””2 1/16″
    • STANDARD BORE SIZE:””.735″
    • MATERIAL:””17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $82.99
    Select options
  • Heavy-Hauler-EZ-Collapse-Dog-Blind
    In Stock

    Heavy Hauler – EZ Collapse Dog Blind

    EZ COLLAPSE- Dog Blind–600 D polyester water resistant exterior with PVC waterproof polyester bottom.  Triangle shape, entrance on each end, door flaps, shoulder carry strap, ground stakes.  NO assembly required, simply take it out of the box and hunt.  A single webbing strap allows for quick and easy set up.  Pulling this strap allows the sides to come up to the top position and lock into the EZ connect latch.  To disassemble, pulling on the same strap disengages the EZ connect latch and sides fold down flat.  Once flat a storage strap with buckle connects everything together and shoulder carry strap  makes for easy transport.  34″L  X 22″W  X 18″T (set up) .  Mossy Oak Shadow Grass Blades.

    $199.99
    Add to cart
  • Lunker_City-38oz-Panhead_Jig-Natural_Craw
    In Stock

    Lunker City – 3/8oz – Panhead Jig

    This jig stands out as unique and versatile as Skipping Jig and swimming jig. It is proven to come over and through most any cover a bass lives in. 

    Designed with a flat disc head with a round surface to make it skip across the water like a flat stone and keeps it planing higher in the water. Under water its round shape turns the hook point away from snags. You really need to try one to appreciate what it can do.

    $6.59
    Select options
  • INVECTOR-PLUS-HIGHFLYER
    In Stock

    Kicks – Invector Plus – High Flyer

    Extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits barrels with Invector plus threads.
    To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.

    • OVERALL LENGTH:””3 15/16″
    • PORTED SECTION LENGTH:””1 1/2″
    • IN-BARREL LENGTH:””2 7/16″
    • STANDARD BORE SIZE:””.743″
    • MATERIAL:””17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $82.99
    Select options
  • Beretta-Optima_HP-High_Flyer
    In Stock

    Kicks – Optima HP – High Flyer

    Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction Conical/parallel internal configuration
    Easy to install and remove with your fingers. No special wrench or tool required.

    • OVERALL LENGTH:”” 3 5/16″
    • PORTED SECTION LENGTH:”” 1 11/16″
    • IN-BARREL LENGTH:”” 1 5/8″
    • STANDARD BORE SIZE:”” .733″
    • MATERIAL:”” 17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $82.99
    Select options
  • BROWNING-INVECTOR-DS-HIGHFLYER-12G
    In Stock

    Kicks – Invector DS – High Flyer

    Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
    Conical/parallel internal configuration
    Easy to install and remove with your fingers. No special wrench or tool required.

    • OVERALL LENGTH:”” 3 5/16″
    • PORTED SECTION LENGTH:”” 1 11/16″
    • IN-BARREL LENGTH:”” 1 5/8″
    • STANDARD BORE SIZE:”” .725″
    • MATERIAL:”” 17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $82.99
    Select options
  • BENELLICRIOPLUSHIGHFLYER
    In Stock

    Kicks – Crio Plus – High Flyer

    Extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits barrels with crio plus style threads.

    • OVERALL LENGTH:””4 9/32″
    • PORTED SECTION LENGTH:””1 1/2″
    • IN-BARREL LENGTH:””2 13/16″
    • STANDARD BORE SIZE:””.723″
    • MATERIAL:””17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $82.99
    Select options
  • BENELLIMOBILCHOKEHIGHFLYER
    In Stock

    Kicks – Mobilchoke – High Flyer

    Kicks High Flyer Choke Tubes are an extended choke with a diagonally-ported design for recoil reduction
    Conical/parallel internal configuration
    Easy to install and remove with your fingers. No special wrench or tool required.

      • OVERALL LENGTH: 3 5/16″
      • PORTED SECTION LENGTH: 1 11/16″
      • IN-BARREL LENGTH: 1 5/8″
      • STANDARD BORE SIZE: .723
      • MATERIAL: 17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm

    $82.99
    Select options
  • INVECTOR
    In Stock

    Kicks – Invector – High Flyer

    Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction Conical/parallel internal configuration
    Easy to install and remove with your fingers. No special wrench or tool required.

    OVERALL LENGTH:”” 3 5/16″
    PORTED SECTION LENGTH:”” 1 11/16″
    IN-BARREL LENGTH:”” 1 5/8″
    STANDARD BORE SIZE:”” .725″
    MATERIAL:”” 17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm

    $82.99
    Select options
  • REMINGTON-HIGHFLYER
    In Stock

    Kicks – Remington – High Flyer

    Kick’s High Flyer extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits 12g barrels with Remington style threads.
    To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.

    • OVERALL LENGTH:””3 9/16″
    • PORTED SECTION LENGTH:””1 1/2″
    • IN-BARREL LENGTH:””2 1/16″
    • STANDARD BORE SIZE:””.730″
    • MATERIAL:””17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm

    $82.99
    Select options
  • EC00018
    In Stock

    Native by Carlton – Open Reed Elk Cow Call-Combo Pack

    Mini Mouth

    The old fighting cow call body with a stiffer reed set deeper into the call that makes super nasally cow sounds.  The heavier reed gives good volume and is user-friendly and hangs up less than the lighter reeds.  I’d have to say if I bought just one call on this site this would be it.

    Loud Mouth

    The loudmouth us just that, loud.  We use this as a locator call.  For those days you need to cut through the wind or reach a long way on silent mornings. You can cram a ton of air through this and get the big volume that reaches out there.  It’s not a finesse call but we use it a lot in trying to stimulate a response, it’s a mainstay on our call lanyard.
    $27.99
    Add to cart