Showing 1–24 of 28 results
-
Kicks – Invector DS – Gobblin’ Thunder
$82.99Kicks”” Gobblin’ Thunder Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – UltiMag – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits 12g barrels with Remington style threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 9/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 1/16″
- STANDARD BORE SIZE: .730″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the Remington Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Lunkerhunt – Impact Agent
Original price was: $10.99.$8.88Current price is: $8.88.The Lunkerhunt Agent Spybait is another addition to our Impact Series of Hard Baits. If you are looking for a bait that will be the finesse presentation to put in front of those finicky fish to get them to bite, you have found the one for the job.
Like a secret agent, this bait will sneak up on the unsuspecting fish with its sleek design then slowly swim away with just enough action coming from the props to get that fish chasing and eating!
-
MTP – The Gripper Gauntlet – 31″ Long
Original price was: $49.99.$43.88Current price is: $43.88.This economically priced, 31” rubber/neoprene gauntlet is built to withstand vigorous use while keeping you warm and dry for the entire season. Triple dipped hand for long lasting strength. Reinforced thumb patch to protect against tears. Specially textured neoprene for grip in all conditions.
-
Kicks – Ultimag – High Flyer
$82.99Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Optima Plus – High Flyer
$82.99Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
6th Sense-Divine Spinnerbait
Original price was: $9.49.$7.99Current price is: $7.99.Strength, vibration, and balance. The Divine Spinnerbait is designed to outperform, outlast, and out fish, any spinnerbait on the market. Built with the highest quality heat-treated stainless-steel spring wire, the Divine Spinnerbait is made for strength without sacrificing the vibration you need to attract fish. The countless testing of wire angle, blade size, and head shape, bring you the most compact, balanced, horizontal swimming, and ultra-vibration spinnerbait yet. No stone was left unturned in the design of the Divine Spinnerbait, featuring a 3D head design, screw-lock bait keeper, custom painted head, a hand-tied skirt, premium blades, and unmatched components. The 6th Sense Lure Lab is proud to bring you the new Divine Spinnerbait.
-
Kicks – Invector Plus – Gobblin’ Thunder
$82.99Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with Invector Plus threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 5/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 7/16″
- STANDARD BORE SIZE: .743″
- MATERIAL: 17 – 4 STAINLESS STEEL
- NON-RETURNABLE: NO RETURNS OR EXCHANGES ON THIS ITEMWe have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Invector – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .625″
- MATERIAL: 17 – 4 STAINLESS STEELWe have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Mobilchoke – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Fits barrels with Mobil choke style threads.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .625″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Optima HP – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .733″
- MATERIAL: 17 – 4 STAINLESS STEEL
- We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Optima Plus – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .625″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – ProBore – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with pro bore style threads. All pro bore barrels are threaded at the end of the barrel.
Remington has multiple thread systems that are not interchangeable.Probore chokes fit:
Remington Versamax
Remington 105cti
Remington 1100 g3
Remington premier (sts, field, upland)If your shotgun barrel has recessed chokes (ie 870, 887, 1100 & 11-87 models), you will need Remington style chokes.
This thread style does not fit the Remington SPR shotguns. You will need Truchokes for those shotgun models.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 9/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 1/16″
- STANDARD BORE SIZE: .735″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Remington – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits 12g barrels with Remington style threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 9/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 1/16″
- STANDARD BORE SIZE: .730″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the Remington Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Probore – High Flyer
$82.99Kick’s High Flyer extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with pro bore style threads. All pro bore barrels are threaded at the end of the barrel.
Remington has multiple thread systems that are not interchangeable.Probore chokes fit:
Remington Versamax
Remington 105cti
Remington 1100 g3
Remington premier (sts, field, upland)If your shotgun barrel has recessed chokes (ie 870, 887, 1100 & 11-87 models), you will need Remington style chokes.
This thread style does not fit the Remington SPR shotguns. You will need Truchokes for those shotgun models.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH:””3 9/16″
- PORTED SECTION LENGTH:””1 1/2″
- IN-BARREL LENGTH:””2 1/16″
- STANDARD BORE SIZE:””.735″
- MATERIAL:””17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
ZMAN – 3/8oz – Spinnerbait – Willow Colorado
$9.79When Bassmaster Classic and Forrest Wood Cup champion–and spinnerbait aficionado–Luke Clausen set out to design a superior spinnerbait, no expense was spared in the design process or sourcing of materials. The unique StabilTrack™ head was 3D modeled with painstaking detail to offer a lifelike profile, low center of gravity, belly groove, and side fins that offers a realistic look while tracking straight and virtually eliminating rolling that plagues other spinnerbaits. A custom light-wire 17-7 stainless steel LiveWire™ frame offers excellent vibration without sacrificing durability, and a 5/0 O’Shaughnessy bend VMC hook is sticky sharp and shaped perfectly for a high hookup ratio. Finished off with custom blades, a wire trailer keeper, 100% silicone skirts hand tied with copper wire, and detailed multi-color paint schemes, the SlingBladeZ is a super premium spinnerbait without a premium price tag!
-
ZMAN – 1/2oz – Spinnerbait – Willow Colorado
$9.79When Bassmaster Classic and Forrest Wood Cup champion–and spinnerbait aficionado–Luke Clausen set out to design a superior spinnerbait, no expense was spared in the design process or sourcing of materials. The unique StabilTrack™ head was 3D modeled with painstaking detail to offer a lifelike profile, low center of gravity, belly groove, and side fins that offers a realistic look while tracking straight and virtually eliminating rolling that plagues other spinnerbaits. A custom light-wire 17-7 stainless steel LiveWire™ frame offers excellent vibration without sacrificing durability, and a 5/0 O’Shaughnessy bend VMC hook is sticky sharp and shaped perfectly for a high hookup ratio. Finished off with custom blades, a wire trailer keeper, 100% silicone skirts hand tied with copper wire, and detailed multi-color paint schemes, the SlingBladeZ is a super premium spinnerbait without a premium price tag!
-
Kicks – Invector Plus – High Flyer
$82.99Extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with Invector plus threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.
- OVERALL LENGTH:””3 15/16″
- PORTED SECTION LENGTH:””1 1/2″
- IN-BARREL LENGTH:””2 7/16″
- STANDARD BORE SIZE:””.743″
- MATERIAL:””17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Zman – 3/4oz – Spinnerbait – Willow Colorado
$10.19When Bassmaster Classic and Forrest Wood Cup champion–and spinnerbait aficionado–Luke Clausen set out to design a superior spinnerbait, no expense was spared in the design process or sourcing of materials. The unique StabilTrack™ head was 3D modeled with painstaking detail to offer a lifelike profile, low center of gravity, belly groove, and side fins that offers a realistic look while tracking straight and virtually eliminating rolling that plagues other spinnerbaits. A custom light-wire 17-7 stainless steel LiveWire™ frame offers excellent vibration without sacrificing durability, and a 5/0 O’Shaughnessy bend VMC hook is sticky sharp and shaped perfectly for a high hookup ratio. Finished off with custom blades, a wire trailer keeper, 100% silicone skirts hand tied with copper wire, and detailed multi-color paint schemes, the SlingBladeZ is a super premium spinnerbait without a premium price tag!
-
Zman – 3/4oz – Spinnerbait – Double Willow
$9.99The unique StabilTrack™ head was 3D modeled with painstaking detail to offer a lifelike profile, low center of gravity, belly groove, and side fins that offers a realistic look while tracking straight and virtually eliminating rolling that plagues other spinnerbaits. A custom light-wire 17-7 stainless steel LiveWire™ frame offers excellent vibration without sacrificing durability, and a 5/0 O’Shaughnessy bend VMC hook is sticky sharp and shaped perfectly for a high hookup ratio. Finished off with custom blades, a wire trailer keeper, 100% silicone skirts hand tied with copper wire, and detailed multi-color paint schemes, the SlingBladeZ is a super premium spinnerbait without a premium price tag!
-
Kicks – Optima HP – High Flyer
$82.99Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .733″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Invector DS – High Flyer
$82.99Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Crio Plus – High Flyer
$82.99Extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with crio plus style threads.- OVERALL LENGTH:””4 9/32″
- PORTED SECTION LENGTH:””1 1/2″
- IN-BARREL LENGTH:””2 13/16″
- STANDARD BORE SIZE:””.723″
- MATERIAL:””17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Mobilchoke – High Flyer
$82.99Kicks High Flyer Choke Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.-
- OVERALL LENGTH: 3 5/16″
- PORTED SECTION LENGTH: 1 11/16″
- IN-BARREL LENGTH: 1 5/8″
- STANDARD BORE SIZE: .723
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
