Showing all 22 results

Active Filters:

Active filters

Clear Filters
  • MOSSBERGULTIMAGHIGHFLYER12G
    In Stock

    Kicks – Ultimag – High Flyer

    Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
    Conical/parallel internal configuration
    Easy to install and remove with your fingers. No special wrench or tool required.

    • OVERALL LENGTH:”” 3 5/16″
    • PORTED SECTION LENGTH:”” 1 11/16″
    • IN-BARREL LENGTH:”” 1 5/8″
    • STANDARD BORE SIZE:”” .725″
    • MATERIAL:”” 17 – 4 STAINLESS STEEL

    We have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $82.99
    Select options
  • BERETTAOPTIMAPLUSHIGHFLYER12G_5000x
    In Stock

    Kicks – Optima Plus – High Flyer

    Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
    Conical/parallel internal configuration
    Easy to install and remove with your fingers. No special wrench or tool required.

    • OVERALL LENGTH:”” 3 5/16″
    • PORTED SECTION LENGTH:”” 1 11/16″
    • IN-BARREL LENGTH:”” 1 5/8″
    • STANDARD BORE SIZE:”” .725″
    • MATERIAL:”” 17 – 4 STAINLESS STEEL

    We have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $82.99
    Select options
  • INVECTOR-PLUS-GT--12G
    In Stock

    Kicks – Invector Plus – Gobblin’ Thunder

    Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits barrels with Invector Plus threads.
    To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.

    • OVERALL LENGTH: 3 5/16″
    • PORTED SECTION LENGTH: 1 1/2″
    • IN-BARREL LENGTH: 2 7/16″
    • STANDARD BORE SIZE: .743″
    • MATERIAL: 17 – 4 STAINLESS STEEL
    • NON-RETURNABLE: NO RETURNS OR EXCHANGES ON THIS ITEMWe have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $82.99
    Select options
  • KICKS-GT-INVECTOR
    Out Of Stock

    Kicks – Invector – Gobblin’ Thunder

    Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required

    • OVERALL LENGTH: 4 1/16″
    • PORTED SECTION LENGTH: 1 5/16″
    • IN-BARREL LENGTH: 2 25/32″
    • STANDARD BORE SIZE: .625″
    • MATERIAL: 17 – 4 STAINLESS STEELWe have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $82.99
    Select options
  • KICKS-GT-MOBILECHOKE
    Out Of Stock

    Kicks – Mobilchoke – Gobblin’ Thunder

    Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.

    Fits barrels with Mobil choke style threads.
    Easy to install and remove with your fingers. No special wrench or tool required

    • OVERALL LENGTH: 4 1/16″
    • PORTED SECTION LENGTH: 1 5/16″
    • IN-BARREL LENGTH: 2 25/32″
    • STANDARD BORE SIZE: .625″
    • MATERIAL: 17 – 4 STAINLESS STEEL
      We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $82.99
    Select options
  • KICKS-BERETTA-OPTIMA-HP-GOBBLIN_THUNDER-675
    Out Of Stock

    Kicks – Optima HP – Gobblin’ Thunder

    Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required

    • OVERALL LENGTH: 4 1/16″
    • PORTED SECTION LENGTH: 1 5/16″
    • IN-BARREL LENGTH: 2 25/32″
    • STANDARD BORE SIZE: .733″
    • MATERIAL: 17 – 4 STAINLESS STEEL
    • We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $82.99
    Select options
  • KICKS-BERETTA-OPTIMA-PLUS-GOBBLIN_THUNDER-675
    In Stock

    Kicks – Optima Plus – Gobblin’ Thunder

    Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required

    • OVERALL LENGTH: 4 1/16″
    • PORTED SECTION LENGTH: 1 5/16″
    • IN-BARREL LENGTH: 2 25/32″
    • STANDARD BORE SIZE: .625″
    • MATERIAL: 17 – 4 STAINLESS STEEL
      We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $82.99
    Select options
  • KICKS-REMINGTON-PROBORE-GOBBLIN_THUNDER-660
    In Stock

    Kicks – ProBore – Gobblin’ Thunder

    Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits barrels with pro bore style threads. All pro bore barrels are threaded at the end of the barrel.
    Remington has multiple thread systems that are not interchangeable.

    Probore chokes fit:
    Remington Versamax
    Remington 105cti
    Remington 1100 g3
    Remington premier (sts, field, upland)

    If your shotgun barrel has recessed chokes (ie 870, 887, 1100 & 11-87 models), you will need Remington style chokes.
    This thread style does not fit the Remington SPR shotguns. You will need Truchokes for those shotgun models.
    To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.

    • OVERALL LENGTH: 3 9/16″
    • PORTED SECTION LENGTH: 1 1/2″
    • IN-BARREL LENGTH: 2 1/16″
    • STANDARD BORE SIZE: .735″
    • MATERIAL: 17 – 4 STAINLESS STEEL
      We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $82.99
    Select options
  • KICKS-REMINGTON-GOBBLIN_THUNDER-660
    Out Of Stock

    Kicks – Remington – Gobblin’ Thunder

    Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits 12g barrels with Remington style threads.
    To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.

    • OVERALL LENGTH: 3 9/16″
    • PORTED SECTION LENGTH: 1 1/2″
    • IN-BARREL LENGTH: 2 1/16″
    • STANDARD BORE SIZE: .730″
    • MATERIAL: 17 – 4 STAINLESS STEEL
      We have done our best to list all the Remington Firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
    $82.99
    Select options
  • KICKS-Reminton-ProBore-High_Flyer-12G
    In Stock

    Kicks – Probore – High Flyer

    Kick’s High Flyer extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits barrels with pro bore style threads. All pro bore barrels are threaded at the end of the barrel.
    Remington has multiple thread systems that are not interchangeable.

    Probore chokes fit:
    Remington Versamax
    Remington 105cti
    Remington 1100 g3
    Remington premier (sts, field, upland)

    If your shotgun barrel has recessed chokes (ie 870, 887, 1100 & 11-87 models), you will need Remington style chokes.
    This thread style does not fit the Remington SPR shotguns. You will need Truchokes for those shotgun models.
    To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.

    • OVERALL LENGTH:””3 9/16″
    • PORTED SECTION LENGTH:””1 1/2″
    • IN-BARREL LENGTH:””2 1/16″
    • STANDARD BORE SIZE:””.735″
    • MATERIAL:””17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $82.99
    Select options
  • INVECTOR-PLUS-HIGHFLYER
    In Stock

    Kicks – Invector Plus – High Flyer

    Extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits barrels with Invector plus threads.
    To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.

    • OVERALL LENGTH:””3 15/16″
    • PORTED SECTION LENGTH:””1 1/2″
    • IN-BARREL LENGTH:””2 7/16″
    • STANDARD BORE SIZE:””.743″
    • MATERIAL:””17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $82.99
    Select options
  • Beretta-Optima_HP-High_Flyer
    In Stock

    Kicks – Optima HP – High Flyer

    Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction Conical/parallel internal configuration
    Easy to install and remove with your fingers. No special wrench or tool required.

    • OVERALL LENGTH:”” 3 5/16″
    • PORTED SECTION LENGTH:”” 1 11/16″
    • IN-BARREL LENGTH:”” 1 5/8″
    • STANDARD BORE SIZE:”” .733″
    • MATERIAL:”” 17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $82.99
    Select options
  • BROWNING-INVECTOR-DS-HIGHFLYER-12G
    In Stock

    Kicks – Invector DS – High Flyer

    Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
    Conical/parallel internal configuration
    Easy to install and remove with your fingers. No special wrench or tool required.

    • OVERALL LENGTH:”” 3 5/16″
    • PORTED SECTION LENGTH:”” 1 11/16″
    • IN-BARREL LENGTH:”” 1 5/8″
    • STANDARD BORE SIZE:”” .725″
    • MATERIAL:”” 17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $82.99
    Select options
  • BENELLICRIOPLUSHIGHFLYER
    In Stock

    Kicks – Crio Plus – High Flyer

    Extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits barrels with crio plus style threads.

    • OVERALL LENGTH:””4 9/32″
    • PORTED SECTION LENGTH:””1 1/2″
    • IN-BARREL LENGTH:””2 13/16″
    • STANDARD BORE SIZE:””.723″
    • MATERIAL:””17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.

    $82.99
    Select options
  • BENELLIMOBILCHOKEHIGHFLYER
    In Stock

    Kicks – Mobilchoke – High Flyer

    Kicks High Flyer Choke Tubes are an extended choke with a diagonally-ported design for recoil reduction
    Conical/parallel internal configuration
    Easy to install and remove with your fingers. No special wrench or tool required.

      • OVERALL LENGTH: 3 5/16″
      • PORTED SECTION LENGTH: 1 11/16″
      • IN-BARREL LENGTH: 1 5/8″
      • STANDARD BORE SIZE: .723
      • MATERIAL: 17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm

    $82.99
    Select options
  • INVECTOR
    In Stock

    Kicks – Invector – High Flyer

    Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction Conical/parallel internal configuration
    Easy to install and remove with your fingers. No special wrench or tool required.

    OVERALL LENGTH:”” 3 5/16″
    PORTED SECTION LENGTH:”” 1 11/16″
    IN-BARREL LENGTH:”” 1 5/8″
    STANDARD BORE SIZE:”” .725″
    MATERIAL:”” 17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm

    $82.99
    Select options
  • REMINGTON-HIGHFLYER
    In Stock

    Kicks – Remington – High Flyer

    Kick’s High Flyer extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
    Easy to install and remove with your fingers. No special wrench or tool required.
    Fits 12g barrels with Remington style threads.
    To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.

    • OVERALL LENGTH:””3 9/16″
    • PORTED SECTION LENGTH:””1 1/2″
    • IN-BARREL LENGTH:””2 1/16″
    • STANDARD BORE SIZE:””.730″
    • MATERIAL:””17 – 4 STAINLESS STEEL

    We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below.  However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm

    $82.99
    Select options
  • MAD-RIP_Bleat
    In Stock

    Flambeau – MAD R.I.P Bleat Call

    Being the industry leader in deer call technology that MAD has been with big buck vocalizations, there is no surprise that we are applying the technology for the ladies of the herd as well. Utilizing our famous back-pressure outer tube, the R.I.P. Bleat mimics the flow of air produced by a whitetail doe’s vocals to reverberate the reed while also replicating the sound of air slowly and naturally passing through her sinuses. The result is the perfect emulation of doe and fawn vocals, as well as the deadly estrus bleat. Using over-molded technology there is no internal adjustment, just the external manipulation of the reed by a rubber push button for a perfect sound every time.

    • Perfect doe and fawn vocals, as well as estrus bleats
    • Simple external push button for manipulating the reed to switch between higher pitched fawn calls and soft doe bleats
    • Includes lanyard
    $12.29
    Add to cart
  • deer-grunt-call
    In Stock

    Flambeau – Grunt Deer Call

    This original grunt call perfectly imitates the grunting sounds of deer. Easy-to-operate and rich in hunting tradition, the grunt call that will be passed down from generation to generation.

    • Weatherproof “no-stick” reed system
    • 100-percent all-natural American hardwood bell
    • Grows richer in tone as the wood ages season after season of use
    • Includes lanyard
    $23.99
    Add to cart
  • 3-foot-texas-rig-decoy-weight-system
    In Stock

    Flambeau – 3′ Decoy Weight System

    No more winding up decoys at the end of a hunt! Grab your decoys, clip them onto the carabineer and go! Super fast deployment that is easy and tangle free.

    • Includes (6) 36-inch complete rigs
    • 4 oz. egg weights
    • Snap swivels
    • Carabineer
    $34.99
    Add to cart
  • braided-decoy-cord
    In Stock

    Flambeau – Braided Decoy Cord

    Flambeau’s braided decoy cord is very easy to string up and you never have to worry about your line being visible in the water. – 200ft (60m)

    $7.29
    Add to cart
  • flambeau-decoy-weights
    In Stock

    Flambeau – Decoy Weights

    Pliable decoy weights easily secure around decoy keels or necks.

    $9.99
    Add to cart