Showing 1–24 of 29 results
-
Kicks – Invector DS – Gobblin’ Thunder
$82.99Kicks”” Gobblin’ Thunder Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – UltiMag – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits 12g barrels with Remington style threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 9/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 1/16″
- STANDARD BORE SIZE: .730″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the Remington Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
6th Sense Fishing – Jigging Spoon
Original price was: $11.88.$9.39Current price is: $9.39.The 6th Sense Divine Jigging Spoon had one goal in mind during development— to be the best jigging spoon on the market. Weighing in at 1oz and 2 inches in length, this spoon is irresistible to almost any species in your lake. Built with a rear weighted center of mass, the Divine Jigging spoon will flutter like a butterfly upon it’s descent, while preventing your treble hook from fouling. This jigging spoon has a built-in embedded swivel for a compact profile, which prevents line twist while also enhancing the action. The Divine Jigging Spoon comes standard with 3D scales, 3D eyes, premium components and, as always, premium paint schemes. The Divine Jigging Spoon comes in 2 per pack and is ready to fish out of the pack to target any game fish species.
-
Kicks – Ultimag – High Flyer
$82.99Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Optima Plus – High Flyer
$82.99Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Invector Plus – Gobblin’ Thunder
$82.99Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with Invector Plus threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 5/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 7/16″
- STANDARD BORE SIZE: .743″
- MATERIAL: 17 – 4 STAINLESS STEEL
- NON-RETURNABLE: NO RETURNS OR EXCHANGES ON THIS ITEMWe have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Invector – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .625″
- MATERIAL: 17 – 4 STAINLESS STEELWe have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Mobilchoke – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Fits barrels with Mobil choke style threads.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .625″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Optima HP – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .733″
- MATERIAL: 17 – 4 STAINLESS STEEL
- We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Optima Plus – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .625″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – ProBore – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with pro bore style threads. All pro bore barrels are threaded at the end of the barrel.
Remington has multiple thread systems that are not interchangeable.Probore chokes fit:
Remington Versamax
Remington 105cti
Remington 1100 g3
Remington premier (sts, field, upland)If your shotgun barrel has recessed chokes (ie 870, 887, 1100 & 11-87 models), you will need Remington style chokes.
This thread style does not fit the Remington SPR shotguns. You will need Truchokes for those shotgun models.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 9/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 1/16″
- STANDARD BORE SIZE: .735″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Remington – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits 12g barrels with Remington style threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 9/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 1/16″
- STANDARD BORE SIZE: .730″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the Remington Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Probore – High Flyer
$82.99Kick’s High Flyer extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with pro bore style threads. All pro bore barrels are threaded at the end of the barrel.
Remington has multiple thread systems that are not interchangeable.Probore chokes fit:
Remington Versamax
Remington 105cti
Remington 1100 g3
Remington premier (sts, field, upland)If your shotgun barrel has recessed chokes (ie 870, 887, 1100 & 11-87 models), you will need Remington style chokes.
This thread style does not fit the Remington SPR shotguns. You will need Truchokes for those shotgun models.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH:””3 9/16″
- PORTED SECTION LENGTH:””1 1/2″
- IN-BARREL LENGTH:””2 1/16″
- STANDARD BORE SIZE:””.735″
- MATERIAL:””17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Chasebaits – The Bobbin’ Frog
Original price was: $15.99.$14.88Current price is: $14.88.Designed to Bob up and down and move like the real thing. With retracting arms and incredible life like legs, fish are going climb over each other to be first to strike. Made of super strong TPE material the BOBBIN’ FROG is robust, flexible and soft enough to ensure an easy weedless hook up.
The hole around the hook ensures air can escape from the lure on the strike. Simply squeeze the lure to remove any water, or let it sink for another swim action.
-
Zman – 4″ – Goat Toadz
$6.89Buoyant enough to float a standard 5/0 EWG hook, the 4-inch GOAT ToadZ features a wide, bulky body and streamlined profile which combine to greatly enhance castability. The customized cupped kicker tail design from the original GOAT™ bait series maximizes mobility and flow at slow, medium or fast retrieve speeds. Sculpted with a keel-shaped ‘hull,’ the bait’s “V” belly yields stability and a quick-planning action on the retrieve. Topside, four dorsal ridges ride the ToadZ’ back, guiding rigging with a single or double frog hook. Ridges also help protect exposed hook points, preventing fouling in grass or other cover while still easily penetrating bass jaws.
-
Savage Gear – 3.5″ – Duratech Toad
$13.99DURATECH TOAD
The Savage Toad’s twin curved paddle tail delivers a strong kicking action that drives big bass insane. The most realistic toad profile ever to hit the market coupled with our extremely buoyant, soft and durable Duratech soft plastic allows anglers to keep this toad floating even when standing completely still. With versatility in the forefront of the design, the Savage toad’s tapered design and deep hook slot allow it to be fished in the heaviest of cover without sacrificing hook up ratio. It can be fished weedless as a topwater and also working perfectly as a jig trailer. Pre rigged with a 4/0 heavy duty worm hook, the Duratech toad delivers unmatched realism, performance and value any angler can appreciate.
-
Chasebaits – 2.5″ – Flexi Frog
$13.99Made from ultra-durable, floating TPE material, The Flexi Frog is perfect for skip casting. Pre-rigged on our custom ‘Donkey Stopper” weedless hooks, it can be burned across the surface to entice an aggressive strike or twitched and paused around structure. The realistic profile with flappin’ legs creates noise and splash, enticing even the weariest fish!
-
Lunkerhunt – Popping Frog Combo
$16.99The Lunkerhunt Popping Frog™ calls fish in by creating a surface disturbance. Its concave face catches water, causing popping and spitting noises.
The swimming legs of the Popping Frog create explosive strikes!
Popping Frogs feature a weedless design and hollow body construction. The Popping Frog’s supersoft hollow body compresses quickly under the slightest amount of pressure. When it does, sharp high quality upturned hooks are ready for the hookset.
The Popping Frogs generate tons of action with minimal movement. They can be worked along edges, through grass, in pockets and on open water.
- Legs extend on the retrieve
- Legs retract and body drops on the pause
- Weedless design
- Wide gap hooks
- Great topwater popping action
-
Lunkerhunt – Compact Frog
$9.99SHORT SKIRTED
Pro and avid anglers have been modifying their skirted frogs for years, the goal being to create a smaller target for bass to hone in on. Modifications create a frog that bass can eat in a single strike. The Lunkerhunt Compact Frog has been designed for maximum efficiency and high percentage hook sets. It features short skirts, a compact body design, short wide gap hooks, and delivers high buoyancy right out of the pack. The Lunkerhunt Compact Frog has a smooth, consistent walk that pushes water and simply catches fish!
- Compact body profile
- Short skirts
- Short wide gap hook
- 2.25″
- 1/2oz
- 3/0 hook
-
Kicks – Invector Plus – High Flyer
$82.99Extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with Invector plus threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.
- OVERALL LENGTH:””3 15/16″
- PORTED SECTION LENGTH:””1 1/2″
- IN-BARREL LENGTH:””2 7/16″
- STANDARD BORE SIZE:””.743″
- MATERIAL:””17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
TufLine – Micro Coated Ice Line
$8.99Tightly braided nylon line impregnated with a coating to ensure minimal moisture absorption. Nylon ice line has a very high abrasion and shock resistance. The tightness of the braid provides a super smooth texture that is easy on hands and tackle but will resist freezing. Available in a variety of sizes to accommodate any fishing conditions.
* OPEN BOX ITEM
-
TufLine – DuraCast Ice
$9.99 – $10.59DuraCast Ice is the most abrasion-resistant superline on the market today. In accelerated fiber to metal tests, DuraCast Ice offered more than double the abrasion resistance of its nearest competitor and more than 12x the abrasion resistance of some national brands. Now you can have confidence when you are in a seesaw battle with larger species like walleye, lake trout, or muskie that the sharp edges of your ice-fishing hole won’t cause you to lose the “big one”. Manufactured with a unique bi-component patent-pending process, DuraCast Ice incorporates an exclusive inside out coating process that ensures a perfectly round, smooth, long-lasting superline that does not break down or lose its rigidity with prolonged use. The inside out coating process ensures permanent coloration of the line with no flaking or annoying coating residues. DuraCast Ice will revolutionize your ice-fishing experience.
-
Kicks – Optima HP – High Flyer
$82.99Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .733″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Invector DS – High Flyer
$82.99Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
