Showing 1–24 of 26 results
-
Kicks – Invector DS – Gobblin’ Thunder
Kicks”” Gobblin’ Thunder Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – UltiMag – Gobblin’ Thunder
Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits 12g barrels with Remington style threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 9/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 1/16″
- STANDARD BORE SIZE: .730″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the Remington Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Ken Capling – XXXL Moose Quarter Game Bag
Our high-quality game bags are tough and have the stretch you need for after the hunt success. Each individual package contains one bag for one large moose quarter. These tightly woven cotton/polyester game bags feature a double stitched bottom. Vacuum sealed, each bag is 16” wide by 60” long and weighs 1 pound 10oz’s for easy packing.
-
Piscifun – Spark Pro 80 – Baitcast Reel
Smooth Operation– Optimal shielded bearings means smooth operation and increased resistance from wear and tear in both fresh and saltwater. We put the right bearings in the right place to ensure impeccable performance. They redefine smoothness for a low profile bait casting
Exceptional Stability and Durability –The Double-Shaft Supported Line Wind delivers an incredible 40% increase instability, as well as an astounding 35% increase in overall durability. This innovation greatly improves the overall operation of the reel.
Powerful Brake and Smooth Drag– The Spark bait caster fishing reel comes with a magnetic braking system featuring 8 magnetic discs, which offers quick on-the-fly adjustment and greatly reduces the chance of The oversize Disc Carbon Fiber Drag provides consistent and smooth stopping power while battling big fish.
Super Compact –The compact, ergonomically designed frame is ultra- The handle knobs are located closer to the rod’s centerline, reducing wobble of the rod and reel in your hand as you crank, this results in less wasted energy and a more powerful retrieve.
Lighter and Stronger– The double hardened anodized 7075 Aircraft grade aluminum main gear reduces the weight of the reel by 10% without sacrificing strength and durability.
-
Kicks – Ultimag – High Flyer
Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Optima Plus – High Flyer
Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Invector Plus – Gobblin’ Thunder
Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with Invector Plus threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 5/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 7/16″
- STANDARD BORE SIZE: .743″
- MATERIAL: 17 – 4 STAINLESS STEEL
- NON-RETURNABLE: NO RETURNS OR EXCHANGES ON THIS ITEMWe have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Invector – Gobblin’ Thunder
Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .625″
- MATERIAL: 17 – 4 STAINLESS STEELWe have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Mobilchoke – Gobblin’ Thunder
Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Fits barrels with Mobil choke style threads.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .625″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Optima HP – Gobblin’ Thunder
Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .733″
- MATERIAL: 17 – 4 STAINLESS STEEL
- We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Optima Plus – Gobblin’ Thunder
Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .625″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – ProBore – Gobblin’ Thunder
Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with pro bore style threads. All pro bore barrels are threaded at the end of the barrel.
Remington has multiple thread systems that are not interchangeable.Probore chokes fit:
Remington Versamax
Remington 105cti
Remington 1100 g3
Remington premier (sts, field, upland)If your shotgun barrel has recessed chokes (ie 870, 887, 1100 & 11-87 models), you will need Remington style chokes.
This thread style does not fit the Remington SPR shotguns. You will need Truchokes for those shotgun models.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 9/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 1/16″
- STANDARD BORE SIZE: .735″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Remington – Gobblin’ Thunder
Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits 12g barrels with Remington style threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 9/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 1/16″
- STANDARD BORE SIZE: .730″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the Remington Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Probore – High Flyer
Kick’s High Flyer extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with pro bore style threads. All pro bore barrels are threaded at the end of the barrel.
Remington has multiple thread systems that are not interchangeable.Probore chokes fit:
Remington Versamax
Remington 105cti
Remington 1100 g3
Remington premier (sts, field, upland)If your shotgun barrel has recessed chokes (ie 870, 887, 1100 & 11-87 models), you will need Remington style chokes.
This thread style does not fit the Remington SPR shotguns. You will need Truchokes for those shotgun models.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH:””3 9/16″
- PORTED SECTION LENGTH:””1 1/2″
- IN-BARREL LENGTH:””2 1/16″
- STANDARD BORE SIZE:””.735″
- MATERIAL:””17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Anglers Choice – Tube 3.75 (Gen 1)
Our original 3.75″ Tubes DOMINATE the Great Lakes and beyond. Manufactured and Cut IN HOUSE (Yes, we cut the tails on our tubes), our tubes offer a great profile and tails that are slightly longer than the body. The perfect blend of softness and durability, they are also Salt Impregnated and Scented to be sure they entice the bite of a lifetime.
-
Diawa – Tatula 100 – Baitcast Reels
The TATULA 100 is the smallest and lightest reel in the series. It is the most comfortable and palm-able reel seen in many years. And with a feather weight of 6.9 ounces it may be the lightest, most fatigue free, reel Daiwa has ever built. The Zero Adjuster spool setting and T-Wing System level wind, casts longer and more accurately.
The comfort is enhanced by redesigned Soft Touch Handle Knobs. The reel is also well suited for junior anglers with smaller hands. The bones of the reel are strong with an Aluminum Frame providing rigidity and a smooth performance. The TATULA 100 is the smallest and lightest reel in the series. It is the most comfortable and palm-able reel seen in many years. And with a feather weight of 6.9 ounces it may be the lightest, most fatigue free, reel Daiwa has ever built.
-
6th Sense – 3″ – Crube
Classic, yet modern. The 6th Sense Crube (“CRAW+TUBE”) was designed to be a classic bait with an updated twist. There is no doubt that a tube style bait catches fish, anywhere, on any body of water, and so does a crawfish. Why not combine the two with realism and practicality?
It is constructed of a tube body with 14 appendages: 6 legs, 2 claws, and 6 tentacles, giving it a pulsing presentation unlike any tube style bait on the market. We purposely designed the head of the body with ‘meat,’ for a wide gap hook, to better suit R-Bend styles, as well as flipping hooks.
-
Savage Gear – Baitcaster-8.1-SG8-100-BC
With power, style, performance and a wide range of unique features, the SG8 series of bait casting reels has it all. The 100-size versions are designed perfectly for casting light lures such as soft baits and crankbaits, but they can also handle medium to heavy baits such as larger soft lures and jerk baits, giving anglers great versatility. The SG8 reels are built strong and rigid thanks to their one-piece aluminum frames, making them ideal for taming all kinds of predators including bass, pike, walleye and even perch and trout. Features such as our proprietary Dura Grease, Line-ID, external centrifugal brake and finely-tuned gear ratios guarantee a reel that runs smoothly time and time again.
-
Kicks – Invector Plus – High Flyer
Extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with Invector plus threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.
- OVERALL LENGTH:””3 15/16″
- PORTED SECTION LENGTH:””1 1/2″
- IN-BARREL LENGTH:””2 7/16″
- STANDARD BORE SIZE:””.743″
- MATERIAL:””17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Piscifun – Torrent – Baitcaster
Unparalleled – Our CNC machined brass gear ensures a strong drag system and durability with 7.1:1 gear ratio. A fast and powerful retrieve offer the ultimate fishing performance.
Phenomenal – Precise gears paired with 3-layer high-grade carbon fiber drag washers provide an ultra-strong 18lbs drag system with power to handle the big ones that you are after. Our new 4.33 inch extended aluminum crank handle gives the angler the leverage and power needed to pull the biggest fish out of the thickest cover.
Anti-corrosion – Corrosion resistant Premium gears and superior quality stainless steel bearings to ensure the smoothness of this reel. Anglers can be confident in freshwater when using the Torrent.
Extraordinary Feel – This reel boasts an Accurate & effective 0-10 magnetic brake, providing the angler with on-the-fly tournament ready adjustments. Double line winding shafts increase the winding stability and durability.
Easy Maintenance – A unique screwed oil hole in the side-plate helps you quickly and efficiently lubricate in order to lengthen reel life and maximize performance. Novice and Pro anglers alike will benefit from this easy method, no more lost or broken parts for basic maintenance.
-
Kicks – Optima HP – High Flyer
Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .733″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Invector DS – High Flyer
Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Crio Plus – High Flyer
Extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with crio plus style threads.- OVERALL LENGTH:””4 9/32″
- PORTED SECTION LENGTH:””1 1/2″
- IN-BARREL LENGTH:””2 13/16″
- STANDARD BORE SIZE:””.723″
- MATERIAL:””17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Mobilchoke – High Flyer
Kicks High Flyer Choke Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.-
- OVERALL LENGTH: 3 5/16″
- PORTED SECTION LENGTH: 1 11/16″
- IN-BARREL LENGTH: 1 5/8″
- STANDARD BORE SIZE: .723
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-