Showing 1–24 of 32 results
-
Kicks – Invector DS – Gobblin’ Thunder
$82.99Kicks”” Gobblin’ Thunder Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – UltiMag – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits 12g barrels with Remington style threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 9/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 1/16″
- STANDARD BORE SIZE: .730″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the Remington Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Koro Traps – Live Beaver Trap
$595.99The Koro Live Beaver trap is based off the original Hancock Live Beaver Trap invented in the 1940s. The Koro has a heavy duty aluminum frame. The metal screen and other metal parts are hot dip galvanized for extended life. The chain link mesh is 11 gauge and also galvanized. The Koro Beaver trap is equipped with .283 dia. music wire springs and are dipped in trap dye to help prevent rusting. The Koro Beaver trap also has a lock mechanism on the from of the trap to stop XL beaver from opening the trap. If relocation is part of the job, simply just unhook the rings to fold up into transport mode and this gives the beaver ample room to exit. The Koro Live Beaver trap is one of the most versatile beaver traps on the market and can be used in many depths of water.
-
The Snare Shop-Tuff Trap
$138.88NOTICE
You must be a licensed trapper to use this trap in Canada
Length: 24 1/2 inches
Pipe: 6 inch diameter, 3/16 inch thick PVC pipe
Door: Guillotine style with viewing holes. The guillotine style door allows you to place the trap right up to the hole.
Back plate: Removable (for easier baiting & cleaning)
Target Animals: skunks, squirrels, cats, opossum, or other similar sized animalsGood To Know:
A skunk can only spray when their tail is raised. This pipe is small enough that a skunk cannot raise their tail to spray you!
Opossums can smell like skunks!
Make sure to place the bait as far back in the trap as possible. You want them to be inside the trap when they step on the pan to eat the bait. A lure can be used to lead them into the trap.
Lifetime Warranty: On all manufacturing errors and normal wear and tear that would cause the Tuff Trap to not perform properly. Warranty becomes void if the Tuff Trap has been altered from its’ original condition in any way. Warranty is for repair or replacement, a refund is not available.
When setting our trap: slide the door up and set it ON the pipe. The trigger rod (which is on top side of the trap) will then be BEHIND the door. When the pan inside the trap is stepped on; the trigger rod will then push the door forward off the edge of the trap, and slide closed.
-
Duke Traps – 1100 – Cage Trap – # 1-1
$23.99NOTICE
You must be a licensed trapper to use this trap in CanadaDuke Standard and Heavy Duty Cage Traps offer the ultimate variety in Humane Live Catch Cage Traps today. The Standard Cage Traps feature steel rod reinforced Spring Loaded Doors, pressure sensitive trip mechanisms and a durable, concealable green powder coated finish. For the animal control professional and trapper, Duke also offers top of the line Heavy Duty Cage Traps featuring all steel rod gravity drop doors, bait protected cage mesh, and a complete internal steel rod frame. All cage trap models are constructed to provide for exceptional durability with no harm to the animal.
# 1-1 Cage Trap
Model: 1100
L”x W”x H”: 16 x 5 x 5
Target: Rodent, Small Squirrel, Chipmunk -
6th Sense – Slice – Blade Bait
Original price was: $8.99.$7.89Current price is: $7.89.Where power fishing and finesse fishing meet, you will find the 6th Sense Slice Blade Bait simply gets the job done. A blade bait is a great search tool for anglers and can be an excellent alternative to a lipless crankbait. Depending on the depth and style you are fishing, the 6th Sense Slice will perform. The Slice offers three different styles of retrieves, simply place the premium grade snap on the most forward slot if you are fishing shallower water or jigging vertically through ice or under the boat; this makes the Slice swim more horizontally. Placing the snap on the middle slot is best for medium to fast retrieve in shallow to medium depths. Lastly, the third slot offers the most aggressive action on fast retrieves, but also provides tremendous action on slower retrieves in deeper depths. The Slice generates a unique vibration that will attract fish throughout the year. As always, the Slice Blade Bait comes standard with premium paint schemes, 3D eyes, 3D gill plates, and premium hooks.
-
Kicks – Ultimag – High Flyer
$82.99Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Optima Plus – High Flyer
$82.99Kicks”” High”” Flyer”” Choke”” Tubes are an extended choke with a diagonally-ported design for recoil reduction
Conical/parallel internal configuration
Easy to install and remove with your fingers. No special wrench or tool required.- OVERALL LENGTH:”” 3 5/16″
- PORTED SECTION LENGTH:”” 1 11/16″
- IN-BARREL LENGTH:”” 1 5/8″
- STANDARD BORE SIZE:”” .725″
- MATERIAL:”” 17 – 4 STAINLESS STEEL
We have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Kicks – Invector Plus – Gobblin’ Thunder
$82.99Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with Invector Plus threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 5/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 7/16″
- STANDARD BORE SIZE: .743″
- MATERIAL: 17 – 4 STAINLESS STEEL
- NON-RETURNABLE: NO RETURNS OR EXCHANGES ON THIS ITEMWe have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Invector – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .625″
- MATERIAL: 17 – 4 STAINLESS STEELWe have done our best to list all the Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Mobilchoke – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Fits barrels with Mobil choke style threads.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .625″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Optima HP – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .733″
- MATERIAL: 17 – 4 STAINLESS STEEL
- We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Optima Plus – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder Extended choke for turkey hunting is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required- OVERALL LENGTH: 4 1/16″
- PORTED SECTION LENGTH: 1 5/16″
- IN-BARREL LENGTH: 2 25/32″
- STANDARD BORE SIZE: .625″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – ProBore – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with pro bore style threads. All pro bore barrels are threaded at the end of the barrel.
Remington has multiple thread systems that are not interchangeable.Probore chokes fit:
Remington Versamax
Remington 105cti
Remington 1100 g3
Remington premier (sts, field, upland)If your shotgun barrel has recessed chokes (ie 870, 887, 1100 & 11-87 models), you will need Remington style chokes.
This thread style does not fit the Remington SPR shotguns. You will need Truchokes for those shotgun models.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 9/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 1/16″
- STANDARD BORE SIZE: .735″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Remington – Gobblin’ Thunder
$82.99Kick’s Gobblin’ Thunder extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits 12g barrels with Remington style threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH: 3 9/16″
- PORTED SECTION LENGTH: 1 1/2″
- IN-BARREL LENGTH: 2 1/16″
- STANDARD BORE SIZE: .730″
- MATERIAL: 17 – 4 STAINLESS STEEL
We have done our best to list all the Remington Firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm
-
Kicks – Probore – High Flyer
$82.99Kick’s High Flyer extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with pro bore style threads. All pro bore barrels are threaded at the end of the barrel.
Remington has multiple thread systems that are not interchangeable.Probore chokes fit:
Remington Versamax
Remington 105cti
Remington 1100 g3
Remington premier (sts, field, upland)If your shotgun barrel has recessed chokes (ie 870, 887, 1100 & 11-87 models), you will need Remington style chokes.
This thread style does not fit the Remington SPR shotguns. You will need Truchokes for those shotgun models.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.- OVERALL LENGTH:””3 9/16″
- PORTED SECTION LENGTH:””1 1/2″
- IN-BARREL LENGTH:””2 1/16″
- STANDARD BORE SIZE:””.735″
- MATERIAL:””17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
Savage Gear – 3/16oz – Minnow Switch Blade
$8.99A dual-action blade lure, with unique action and style. When tied onto the snap attached behind the gill plate, the lure will vibrate and flash on retrieve, and glide to the bottom when paused. When the line tie in the head is used, the lure will run high and flutter like a spoon on the retrieve. With both of these actions, it is a versatile search bait, equally as effective in both deep and shallow water – can be worked deep or shallow, in rivers, lakes, and even Saltwater. A super versatile lure, with a very special action that triggers strikes from just about any predator fish. Great for Bass, Walleye, Trout and many saltwater species.
-
Venom Lures – 5/8oz – Vibra-Max – Blade Bait
$7.99Rod-thumping vibration and eye-catching flash are what make our VibraMax Blades the most sought after blade baits on the market. Holographic paint that reflects light at all angles give multiple species of fish an easy target. No need to swap out the hooks either, we already use best-in-class extra-sharp triple grip black nickel hooks. Great for jigging, casting, and trolling for lake trout, walleye, saugeye, bass, crappie, and so many more species!
-
Kicks – Invector Plus – High Flyer
$82.99Extended choke with diagonally-ported design for recoil reduction. Conical/parallel internal configuration.
Easy to install and remove with your fingers. No special wrench or tool required.
Fits barrels with Invector plus threads.
To ensure that you receive the correct chokes, it is important that you compare your existing chokes with the measurements and photographs provided on this page.
- OVERALL LENGTH:””3 15/16″
- PORTED SECTION LENGTH:””1 1/2″
- IN-BARREL LENGTH:””2 7/16″
- STANDARD BORE SIZE:””.743″
- MATERIAL:””17 – 4 STAINLESS STEEL
We have done our best to list all the firearms that these chokes fit in the ADDITIONAL INFORMATION section below. However we also recommend visiting Kick’s Industries Choke Selector page HERE to verify the proper choke for your firearm.
-
SteelShad – 2oz – XXL Series
$14.99The SteelShad XXL is currently the largest and heaviest in the SteelShad blade bait lineup. The XXL Gold is made of durable stainless steel, weighs 2 ounces, is 5 inches long and arrives equipped with 5/0 single hooks coated for fresh and salt water use. This Series has two split ring hole options and one split ring at the top of the lure for increased depth and vibration control.
-
SteelShad – 3/4oz – XL Series
$12.99The SteelShad® XL 3/4 oz. blade is 3 3/4 inches long, made from durable stainless steel with a molded lead weight, and feature two #4 VMC Permasteel hooks that are coated for both fresh and salt water fishing.
-
SteelShad – 3/8oz – Original
$10.99The Original SteelShad® 3/8 oz. Our best selling silver blade bait is a go to for imitating dying bait fish. Original SteelShad lures are 2 3/4 inches long, made from durable stainless steel with a molded lead weight, and feature two #6 VMC Permasteel hooks that are coated for both fresh and salt water fishing.
-
SteelShad – 1/4oz – Mini Series
$12.99The SteelShad® Mini 1/4 oz. blade bait in our Kentucky Shad pattern is 1 3/4 inches long, made from durable stainless steel with a molded lead weight, and feature two #12 VMC Permasteel hooks that are coated for both fresh and salt water fishing.
-
SteelShad – 1/4oz – Mini Series – Glow
$14.99The SteelShad® Mini 1/4 oz. is 1 3/4 inches long, made from durable stainless steel with a molded lead weight, and feature two #12 VMC Permasteel hooks that are coated for both fresh and salt water fishing. SteelShad’s glow effect is instantly charged by sunlight or any other light source. During the day, each lift of your rod will allow the natural sunlight to provide a long lasting luminescent charge to keep the lures glowing below the waters surface. During low light or nighttime conditions, the quick use of a flashlight can be used to recharge the lures between casts.
